DRISELNETWORKS
Home
Reading Resources
Lab Learning Resources
Search
Home
Overview
Overview
Switching
Lab 1 - Configuring Trunks
Lab 2 - Configuring EtherChannels
Lab 3 - DHCP Snooping
Lab 4 - IP Source Gaurd
Lab 5 - Dynamic ARP Inspection
Lab 6 - MAC Address-list
Lab 7 - VLAN Access-map - I
Lab 8 - VLAN Access-map - II
Lab 9 - Storm Control - I
Lab 10 - Storm Control - II
Lab 11 - Configuring Priavate VLANs
Lab 12 - Basic Spanning-tree Configuration
Lab 13 - Advanced Spanning-tree configuration
Lab 14 - Rapid Spanning-tree Protocol (802.1w)
Lab 15 - Multiple Spanning-tree Protocol (802.1s)
Lab 16 - Spanning-tree PortFast
Lab 17 - Configuring UplinkFast
Lab 18 - Configuring BPDUGaurd
Lab 19 - Configuring BPDUFilter
Lab 20 - Configuring BackboneFast
Lab 21 - Spanning-tree RootGaurd
Lab 22 - Spanning-tree LoopGaurd
DMVPN
Lab 1 - DMVPN - Phase #1 With Static Mapping
Lab 2 - DMVPN - Phase #1 With Dynamic Mapping
Lab 3 - DMVPN - Phase #2 Using Static Mapping
Lab 4 - DMVPN - Phase #2 Using Dynamic Mapping
Lab 5 - Running Routing Protocols on DMVPN Phase #1
Lab 6 - Running Routing Protocols on DMVPN Phase #2 and Phase #3
RIPv2
Lab 1 - DMVPN - Phase #1 with Static Mapping
Lab 2 - DMVPN - Phase #1 with Dynamic Mapping
Lab 3 - DMVPN - Phase #2 with Static Mapping
Lab 4 - DMVPN - Phase #2 with Dynamic Mapping
Lab 5 - Running Routing Protocols on DMVPN Phase #1
Lab 6 - Running Routing Protocols on DMVPN Phase #2 and Phase #3
RIP
Lab 1 - Configuring RIPv2
EIGRP
Lab 1 - EIGRP Named Configuration
Lab 2 - EIGRP Stub
Lab 3 - Advanced EIGRP Stub Configuration
Lab 4 - EIGRP Filtering
Lab 5 - EIGRP Mock Lab
Lab 6 - Configuring EIGRP SHA-2 256 Authentication
OSPF
Lab 1 - Running OSPF On The Interfaces
Lab 2 - Establishing OSPF Adjacency
Lab 3 - OSPF Broadcast Networks
Lab 4 - OSPF Non-Broadcast Networks
Lab 5 - OSPF Point-to-Point Networks
Lab 6 - OSPF "Point-to-Multipoint" & "Point-to-Multipoint Non-Broadcast" Networks
Redistribution
Lab 1 - Basics of Redistribution
Lab 2 - Basics of Redistribution - II
Lab 3 - Redistribution - RIPv2 & EIGRP
Lab 4 - Redistribution - RIPv2 & OSPF
BGP
Lab 1 - Establishing Neighbor Adjacency
Lab 2 - Route Reflectors
Lab 3 - Conditional Advertisement & BGP Backdoor
Lab 4 - Route Dampening
Lab 5 - BGP Aggregation
Lab 6 - The Community Attribute
Lab 7 - BGP Cost Community
Lab 8 - BGP Load Balancing
Lab 9 - Local Preference - I
Lab 10 - Local Preference - II
Lab 11 - The AS-Path Attribute
Lab 12 - The Weight Attribute
Lab 13 - Multi Exit Discriminator Attribute
Lab 14 - BGP Filtering
Lab 15 - Administrative Distance
Lab 16 - Advanced BGP Configuration
Lab 17 - BGP Confederation
Lab 18 - BGP Hiding Local AS Number
Lab 19 - BGP Allowas-In
Lab 20 - BGP Automatic-tag, AS-Path tag and Table-map
Lab 21 - 4 Byte AS Number
Narbik CCIE Routing and Switching v5.0
Welcome to the Narbik CCIE Routing and Switching v5.0 section of our site
Overview
Overview
Switching
Lab 1 - Configuring Trunks
Lab 2 - Configuring EtherChannels
Lab 3 - DHCP Snooping
Lab 4 - IP Source Gaurd
Lab 5 - Dynamic ARP Inspection
Lab 6 - MAC Address-list
Lab 7 - VLAN Access-map - I
Lab 8 - VLAN Access-map - II
Lab 9 - Storm Control - I
Lab 10 - Storm Control - II
Lab 11 - Configuring Priavate VLANs
Lab 12 - Basic Spanning-tree Configuration
Lab 13 - Advanced Spanning-tree configuration
Lab 14 - Rapid Spanning-tree Protocol (802.1w)
Lab 15 - Multiple Spanning-tree Protocol (802.1s)
Lab 16 - Spanning-tree PortFast
Lab 17 - Configuring UplinkFast
Lab 18 - Configuring BPDUGaurd
Lab 19 - Configuring BPDUFilter
Lab 20 - Configuring BackboneFast
Lab 21 - Spanning-tree RootGaurd
Lab 22 - Spanning-tree LoopGaurd
DMVPN
Lab 1 - DMVPN - Phase #1 With Static Mapping
Lab 2 - DMVPN - Phase #1 With Dynamic Mapping
Lab 3 - DMVPN - Phase #2 Using Static Mapping
Lab 4 - DMVPN - Phase #2 Using Dynamic Mapping
Lab 5 - Running Routing Protocols on DMVPN Phase #1
Lab 6 - Running Routing Protocols on DMVPN Phase #2 and Phase #3
RIPv2
Lab 1 - Configuring RIPv2
EIGRP
Lab 1 - EIGRP Named Configuration
Lab 2 - EIGRP Stub
Lab 3 - Advanced EIGRP Stub Configuration
Lab 4 - EIGRP Filtering
Lab 5 - EIGRP Mock Lab
Lab 6 - Configuring EIGRP SHA-2 256 Authentication
OSPF
Lab 1 - Running OSPF On The Interfaces
Lab 2 - Establishing OSPF Adjacency
Lab 3 - OSPF Broadcast Networks
Lab 4 - OSPF Non-Broadcast Networks
Lab 5 - OSPF Point-to-Point Networks
Lab 6 - OSPF "Point-to-Multipoint" & "Point-to-Multipoint Non-Broadcast" Networks
Redistribution
Lab 1 - Basics of Redistribution
Lab 2 - Basics of Redistribution - II
Lab 3 - Redistribution - RIPv2 & EIGRP
Lab 4 - Redistribution - RIPv2 & OSPF
BGP
Lab 1 - Establishing Neighbor Adjacency
Lab 2 - Route Reflectors
Lab 3 - Conditional Advertisement & BGP Backdoor
Lab 4 - Route Dampening
Lab 5 - BGP Aggregation
Lab 6 - The Community Attribute
Lab 7 - BGP Cost Community
Lab 8 - BGP Load Balancing
Lab 9 - Local Preference - I
Lab 10 - Local Preference - II
Lab 11 - The AS-Path Attribute
Lab 12 - The Weight Attribute
Lab 13 - Multi Exit Discriminator Attribute
Lab 14 - BGP Filtering
Lab 15 - Administrative Distance
Lab 16 - Advanced BGP Configuration
Lab 17 - BGP Confederation
Lab 18 - BGP Hiding Local AS Number
Lab 19 - BGP Allowas-In
Lab 20 - BGP Automatic-tag, AS-Path tag and Table-map
Lab 21 - 4 Byte AS Number